欢迎访问busbarcuttingmachine官方网站!

+8613853146766

303E-3-S CNC Bending Punching Cutting Busbar Machine

Source:wenhui  Date:2019-07-10 15:11

303E-3-S CNC Bending Punching Cutting Busbar Machine

busbar-machine-303E-3-S-alibaba.jpg


Main Function
To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/
vertical bending/ emboss/Press cable thread /twist/anti-press flat the copper/aluminum busbar ect.

Function Introduction
●● 1. Cutting unit adopts double-column shear structure (patent number: ZL201120262802.1),Cut mouth flat,
no burr, no waste.
●● 2. Punching unit adopts Nodular cast iron,4/6/8 modes position turrent punching structure which is a totaly
whole one,improving concentric degree of moulds,
●● prolonging the service life of the moulds,saving time of change.
●● 3. Bending unit adopts closed bending structure,making it is more uniform when processing horizontal
bending and embossing. Also prolonging the service life.
●● 4. Bending unit adopts double work table,achieved a real sense of the three position working at thge same
time while working without impact each other.
●● 5. Adopting PLC controled, bending angle can be cnc,and with a storage function.
●● 6. Three units of the machine can work at the same time,not affecting each other,Improving the processing
efficiency.
●● 7. Hydraulic tank with thick plate welding,and is treated by phosphating, making hydraulic oil can be long time
used and will not degenerate.

Item

Model

DGWMX303E-3-S

DGWMX303E-3

Max. Punching Force (KN)

300

300

Punching Diameter Range (MM)

Φ4.3-25

Φ4.3-25

Max. Process Thickness (MM)

12×160

12×160

Max. Vertical Bending Width (MM)

120

120

Work Bench Size(MM)

1500×1200/940×420

1500×1200/940×420

Size Of The Machine (MM)

1750×1350×1500

1750×1350×1300

Weight Of The Machine(KG)

1390KG

1370KG

Bending Angle Cnc

YES

NO

The Three Units Work At The Same Time

YES

YES

 




All product pictures existing in this catalog are representative and may not have exactly the same appearance and features with the machines to be produced later. Machine appearances and features are subject to change without any prenotification.